83396577
Aldgate Pumps
Aldgate Pump Sales & Service can design a system to treat all kinds of water problems. Call them today on 8339 6577.

Water Treatment Systems

Getting the most out of your bore or dam water

Always remember, ground water is NOT always safe. Even if it looks clear and tastes good – there may be things you can’t see and taste, like metals, low pH and bacteria.

It can be difficult to determine whether you actually need a water treatment system or what type of system would be best for you. Although the choice to use a water treatment system is up to each individual, Aldgate Pump Sales & Service can certainly help with your product selection process.

Laboratory Water Analysis

Aldgate Pump Sales & Service can provide you with a laboratory water analysis that will let us know the quality of your water. From our detailed water analysis we can recommend a an effective, environmentally friendly water treatment system that provides clean, safe and usable to get the most out of your water, whether it’s for stock, domestic household use or simply for irrigation.

Contact us on (08) 8339 6577 to discuss which is the right water treatment system for your needs.

Jump To the following range: 
Iron Removal/Softener Systems
Softener Systems
Calcite pH Correction Systems
Mixed Bed Sediment Systems
Carbon Filter Systems 

Iron Removal System - Puretec

Applications

  • Automatic backwash
  • Maintenance free
  • 25mm BSP connections
  • 10 selectable pre-programmed cycles

Puretec IRS3000

The Puretec IRS3000 system is designed to prevent the staining and rust build up in your water system. The system reduces the level of iron and manganese.
 

Iron Removal /Softener systems - Waterways
Designed to remove ferrous iron and manganese from solution and to soften water. 5 stage regeneration. Microprocessor control.

Applications

  • 15,000 litres at 100 mg/l hardness
  • Flow Rate - Continuous 30 litres per minute
  • Pressure Maximum 600 kpa (85psi)

I.R Softener 948.5000

Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non scaling/staining.
 

Applications

  • 60,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 70 litres per minute
  • Pressure Maximum 600 kpa (85psi)

I.R Softener 1665.2750

Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non scaling/staining.
 

Applications

  • Capacity 60,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 50 litres per minute
  • Pressure Maximum 600 kpa (85psi)

I.R Softener 1665.5000

Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non scaling/staining.
 

Applications

  • Capacity 102,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 115 litres per minute
  • Pressure Maximum 600 kpa (85psi)

I.R Softener 2162.2850

Hard Water is water that contains excessive amounts of minerals such as calcium and magnesium. As the name implies, water softeners ‘soften’ water. For detailed information, please read our fact sheet.
 

Softener systems - Waterways
"Hard water" is water that contains excessive amounts of minerals such as calcium and magnesium. The effect of hard water is that is difficult to lather and rinse and will commonly cause scale formations that are likely to result in damage to plumbing fixtures and fittings. Soft water lathers and rinses more freely. Laundry will be soft and fluffy, skin and hair feel cleaner and there is reduced potential more soap scum to build up on shower screens, bathroom tiles and fittings. 


Applications

  • Capacity 10,000 litres at 100ppm hardness
  • Continuous 30 Litres per minute 
  • 20mm BSP connections
  • Automatic system

SEV8 Auto Softener

As the name implies, water softeners ‘soften’ water. Soft water lathers and rinses more freely. Laundry will be soft and fluffy and there is reduced potential for soap scum to build up on shower screens, bathroom tiles and fittings.
 

Applications

  • Capacity 17,000 litres at 100ppm hardness
  • Continuous 35 litres per minute
  • Automatic System

SEV17 Auto Softener

As the name implies, water softeners ‘soften’ water. Soft water lathers and rinses more freely. Laundry will be soft and fluffy and there is reduced potential for soap scum to build up on shower screens, bathroom tiles and fittings.
 

Applications

  • 34,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 40 litres per minute
  • Pressure Maximum 600 kpa (85psi)
  • Automatic System

SEV34 Auto Softener

As the name implies, water softeners ‘soften’ water. Soft water lathers and rinses more freely. Laundry will be soft and fluffy and there is reduced potential for soap scum to build up on shower screens, bathroom tiles and fittings.
 

Applications

  • Manual system - integrated twist timer
  • 10,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 20 litres per minute
  • Pressure Maximum 600 kpa (85psi)

STT8 Manual Softener

As the name implies, water softeners ‘soften’ water. Soft water lathers and rinses more freely. Laundry will be soft and fluffy and there is reduced potential for soap scum to build up on shower screens, bathroom tiles and fittings.
 

Applications

  • Manual system - integrated twist timer
  • 17,000 litres at 100 mg/l hardness
  • Flow Rate Continuous 25 litres per minute
  • Pressure Maximum 600 

STT17 Manual Softener

As the name implies, water softeners ‘soften’ water. Soft water lathers and rinses more freely. Laundry will be soft and fluffy and there is reduced potential for soap scum to build up on shower screens, bathroom tiles and fittings.
 

Calcite pH correction systems - Waterways
Waterways pH correction filters increase pH by the action of water running over calcite. Calcite is a rock like substance that exhibits an alkaline pH. As low pH water (acidic) passes through the calcite bed, it (calcite) slowly dissolves adding pH to the water being treated. Calcite pH correction systems do not require backwashing, but from time to time the calcite needs to be topped up.

Applications

  • Media Tank 9” (23cm) x 48” (102cm)
  • Media 40kg of calcite
  • Flow Rate Continuous 20 litres per minute
  • Pipe Sizes Inlet/outlet 3/4” (20mm)

CF1 Calcite Filter

Calcite is a food grade safe to drink pH adjustment. Calcite filters are used to raise pH in acidic waters to a neutral level, typically pH 7.0 is optimum. Low pH waters are very corrosive and outside of safe water guidelines.
 

Applications

  • Media Tank 13” (33cm) x 54” (137cm)
  • Media 80kg of calcite
  • Flow Rate Continuous 30 litres per minute
  • Pipe Sizes Inlet/outlet 3/4” (20mm)

CF2 Calcite Filter

Calcite is a food grade safe to drink pH adjustment. Calcite filters are used to raise pH in acidic waters to a neutral level, typically pH 7.0 is optimum. Low pH waters are very corrosive and outside of safe water guidelines.
 

Applications

  • Media tank 16” (41cm) x 65” (165cm)
  • Flow Rate Continuous 40 litres per minute
  • Pressure Maximum 600 kpa (85 psi)

CF3 Calcite Filter

Calcite is a food grade safe to drink pH adjustment. Calcite filters are used to raise pH in acidic waters to a neutral level, typically pH 7.0 is optimum. Low pH waters are very corrosive and outside of safe water guidelines.
 

Applications

  • Media Tank 13” (33cm) x 54” (137cm)
  • Media 80kg of calcite
  • Flow Rate Continuous 75 litres per minute
  • Pipe Sizes Inlet/outlet 1” (25mm)

High Flow CF2

Light commercial high flow version of the CF2 calcite filter. Calcite filters are used to raise pH in acidic waters to a neutral level. Low pH waters are very corrosive and outside of safe water guidelines.
 

Applications

  • Media Tank 16” (41cm) x 65” (165cm)
  • Media 125kg of calcite
  • Flow Rate Continuous 75 litres per minute
  • Pipe Sizes Inlet/outlet 1” (25mm)

High Flow CF3

Light commercial high flow version of the CF2 calcite filter. Calcite filters are used to raise pH in acidic waters to a neutral level. Low pH waters are very corrosive and outside of safe water guidelines.
 

Sediment Filters - Waterways
Mixed bed filters are used for sedimentremoval over a wide range of flow rates. Due to a muchlarger surface area and the ability to be backwashed the dirtholding/handling capability of a mixed bed filter is far superiorto cartridges. The beds can be made up of different filteringsands and filtration media.

Applications

  • Media 53kg of mixed mediaSand, anthracite and gravels
  • Control Valve Fleck 5000 electronic valve,  full adjustable function.
  • 35 litres per minute

SA2 Auto Mixed Bed

Mixed bed sediment filters comprise various grades of sands and gravels with final stage filtration through a bed of anthracite. They are designed to remove dirt and turbidity and rust etc.
 

Applications

  • Media 125kg of mixed mediaSand, anthracite and gravels
  • Control Valve Fleck 5000 electronic valve,  full adjustable function.
  • 50 litres per minute

SA3 Auto mixed Bed

Mixed bed sediment filters comprise various grades of sands and gravels with final stage filtration through a bed of anthracite. They are designed to remove dirt and turbidity and rust etc.
 

Applications

  • 53kg of mixed mediaSand, anthracite and gravels
  • Fleck 2510 manual valveFast backwash and rapid rinse
  • 35 Litres per minute

SM2 Manual Mixed Bed

Mixed bed sediment filters comprise various grades of sands and gravels with final stage filtration through a bed of anthracite. They are designed to remove dirt and turbidity and rust etc.
 

Applications

  • 125kg of mixed mediaSand, anthracite and gravels
  • Fleck 2510 manual valveFast backwash and rapid rinse
  • 50 Litres per minute

SM3 Manual Mixed Bed

Mixed bed sediment filters comprise various grades of sands and gravels with final stage filtration through a bed of anthracite. They are designed to remove dirt and turbidity and rust etc.
 

Carbon Filters - Waterways

Carbon filters are use for waterclarification (colour removal), bacterial capture/retention,chlorine removal and odour/taste removal. Carbon must bebackwashed regularly to reduce the risk of bio-fouling occurring.Carbon filters don’t cope well with sediment loads, it’s thereforecommon to have a mixed bed filter installed prior to handle this.

Applications

  • Media Tank 13” (33cm) x 54” (137cm)
  • Media 28kg of carbon
  • Fleck 5000 electronic valve, fast and rapidrinse, full adjustable function,
  • 35 litres per minute

CA2 Auto Carbon

Carbon filters remove chlorine and other specific chemicals and disinfection by-products. Different carbon types are available for other applications - such as colour reduction.
 

Applications

  • Media Tank 16” (41cm) x 65” (165cm)
  • Media 50kg of carbon
  • Fleck 5000 electronic valve, fast and rapidrinse, full adjustable function,
  • 50 Litres per minute

CA3 Auto Carbon

Carbon filters remove chlorine and other specific chemicals and disinfection by-products. Different carbon types are available for other applications - such as colour reduction.
 

Applications

  • Media Tank 13” (33cm) x 54” (137cm)
  • Media 28kg of carbon
  • Fleck 2510 manual valveFast backwash and rapid rinse
  • 35 Litres per minute

CM2 Manual Carbon

Carbon filters remove chlorine and other specific chemicals and disinfection by-products. Different carbon types are available for other applications - such as colour reduction.
 

Applications

  • Media Tank 16” (41cm) x 65” (165cm)
  • Media 50kg of carbon
  • Fleck 2510 manual valveFast backwash and rapid rinse
  • 50 Litres per minute

CM3 Manual Carbon

Carbon filters remove chlorine and other specific chemicals and disinfection by-products. Different carbon types are available for other applications - such as colour reduction.
 
Site by NrG Advertising